Xerox Versant 180 Press User Manual page 154

Troubleshooting
2. Rotate Handle 2 to the right until it is in the horizontal position, and then pull out
the transfer module.
3. Remove the visible jammed paper.
4. After clearing the jammed sheets, ensure that no torn paper pieces are left in the
machine.
5. Move Handle 2b and remove any jammed paper.
6. Return Handle 2b to its original position.
7. Move Handle 2e and remove any jammed paper.
8. Return Handle 2e to its original position.
9. Pull down Handle 2f and remove the jammed paper.
10. Return Handle 2f to its original position.
11. Push in the transfer module completely and rotate Handle 2 to the left.
12. Close the pree Front Door.
13. Run five blank sheets to clean left-over toner from the fuser roll and resume the
copying/printing process.
6-32
® ®
Xerox Versant 180 Press
User Guide