Xerox Versant 180 Press User Manual page 137

Problem
Image Registration, Perpendicularity, Skew, and Magnification
Suggested Solutions
1. If using trays 1, 2, or 3, try switching to optional tray 6, 7, 8, or 9 (if available).
Note
Trays 6-9 have better registration and skew performance.
2. Create and/or use an existing Alignment Profile.
Note
Before creating a new and/or using an existing manual alignment, read all the information
in the Alignment Adjustment of System Administration Guide.
• Use Center Line Stock for Alignment Profiles. If the problem occurs when using this
stock, call the Customer Support Center.
• The following information is a summary of the steps required for each procedure; for
complete instructions, refer to the System Administration Guide, Alignment Adjustment.
• To create a New Alignment Profile, perform the following:
Note
This option can be found in Machine Status > Tools > Setup & Adjustment > Alignment
Adjustment Setup.
a. From the Alignment tab, select the New button.
A "New Profile Properties" window displays.
b. Enter the Name you want to assign to the profile.
c. Perform the Auto Alignment procedure.
d. Run a set of test prints to evaluate the output, and evaluate the results.
e. If necessary, depending on the results, perform a Manual Adjustment.
f. When making manual adjustments to multiple items, use the following guidelines:
• Adjust the image in the following order: Registration, Perpendicularity, Skew, and
Magnification.
• Choose only one option at a time (such as Registration), then run a set of test
prints to evaluate the output. Determine if the printed output for the selected option
is acceptable and if it is acceptable, then select and adjust the next alignment op-
tion.
• After each option is selected, always run a set of test prints and evaluate the output.
Determine if the output for the selected feature is acceptable, and if it is, continue
to adjust another alignment option as required.
• To use an existing Alignment Profile, perform the following:
Note
The option may be found by selecting Machine Status > Tools > Setup & Adjustment >
Alignment Adjustment Setup. Select the desired Custom Paper > Change Settings >
Alignment Adjustment Setup > Change Settings.
a. Select the Alignment Adjustment button.
b. Select either Use Default or Select from List.
® ®
Xerox Versant 180 Press
User Guide
Troubleshooting
6-15