Xerox Versant 180 Press User Manual page 139

Suggested Solutions
Tip
Changing the default setting of 0 (zero) is a temporary solution because environmental
conditions vary from day to day. Upon completion of the print job, the recommendation
is to return the option to its default setting.
• Use this feature to adjust the fuser temperature.
• If dry ink / toner comes off the paper, especially with special media, resolve the problem
by increasing the fusing temperature.
• If the fuser temperature is too high when printing on lightweight paper, it may cause
blocking, media damage, or paper jams at the peeling unit in the fusing module.
• If the fuser temperature is too low, it may cause poor fusing on higher-density image
areas and toner may peel off the printed output.
• This feature is accessed from Machine Status > Tools > Setup & Adjustment > Custom
Paper Settings. Select the desired Custom Paper > Change Settings > Adjust Fuser
Temperature > Change Settings.
• Based on the printed output, increase or decrease the Adjust Fuser Temperature in
increments of 1° or 2°.
• After each incremental adjustment, run test prints and evaluate the output to determine
if additional adjustments are required.
2. If feeding paper from trays 6-9 and if the paper is damp, confirm that the Tray Heater
feature is Enabled (checked).
Note
Tray Heater is available only for trays 6-9.
• Use this feature to Enable (checked) or Disable (unchecked) the tray heater.
• The tray heater warms the air that is blown into the tray by Adjust Air Assist Values
and helps prevent paper jams and multifeeds by loosening contact between sheets.
• The tray heater may partially dry paper and affect print quality. If print quality is affected
by dry paper, disable the tray heater.
Note
Disabling the tray heater may result in an increase of multifeeds.
• This feature is accessed from Machine Status > Tools > Setup & Adjustment > Custom
Paper Settings. Select the desired Custom Paper > Change Settings > Tray Heater >
Change Settings.
• To Enable (check) the box for Tray Heater.
® ®
Xerox Versant 180 Press
User Guide
Troubleshooting
6-17