General - Leibinger JET2 neo Manual

Page 58
Status field <General> (6): In this field the current operating condition of the nozzle
as well as the status of the head cover and the ink supply are displayed.
Operating conditions nozzle
Opening nozzle
Closing nozzle
Nozzle open
Nozzle closed
Status field <Product counter> (7): The current value of the production counter is
displayed in the field. By pressing on the field you can change or reset the value of
the counter.
If a print stop is defined after a pre-defined amount of prints, the value is also shown
in the status field. For better visualization that a pre-defined print stop has been
defined, the field is displayed with a red frame.
Figure 17
Status field <Product counter>
You will find further information also in the chapters Reset
production counter and Change production counter as well as in the
chapter Pre-defined print stop!
Release R1.07 en
Operation – Elements and procedures
Status head cover
Headcover open
Headcover closed
Group 6
Status ink supply
Ink on
Ink off
JET2 neo