Leibinger JET2 neo Manual page 36

Page 34
Please note, that the grounding point (6) is hidden behind the round
grounding-symbol-label (7) on the lower left hand side of the cabinet
of the printer.
Figure 6
Grounding schematic and grounding point
5
Grounding schematic
1
4
1 – Printer cabinet
2 – Installation (machine)
3 – Print head
Grounding instructions
A separate grounding line (min. cable cross-section 2.00 mm
cabinet must be installed before the print head is mounted in the installation and
before the printer is plugged to the power supply.
The connection must be carried with a solid bonding that corresponds with
existing guidelines.
Annotation: A suitable grounding cable is available optionally (accessories).
The installation (machine) and the printer must have the same potential/ground.
Release R1.07 en
Transport/Start up
6
ground / earth
(earth)
4 – Grounding line
5 – Umbilical
6 – Grounding point (M6)
3
2
7 – Grounding symbol
(label)
2
) to the printer
JET2 neo
Group 5
7