Leibinger JET2 neo Manual page 62

Page 60
Display
all LEDs off
red LED on
yellow LED on
green LED on
Release R1.07 en
Operation – Elements and procedures
Device status
No errors or warnings are
pending, but the JET2 neo is
not ready to change to the
print mode.
An error is pending which
requires an immediate inter-
vention of the operator to get
the print readiness or to
continue an active print
process.
An intervention of the operator
is required in the foreseeable
future because an warning is
pending.
If the JET2 neo is in the print
mode, the print process will be
continued.
The printer signalizes the
readiness to print or that it can
be switched to the active print
mode.
Causation/Comment
e.g.: Nozzle is closed, head cover
is open, etc.
e.g.: Phasing error, PrintGo-error,
HV-error, etc.
e.g..: Refill, Leakage, etc.
If the message is acknowledged
without changing the condition
(e.g. no refill has been carried
out) the message will appear
again after one minute.
The button <Print stop> is
illuminated.
Group 6
JET2 neo