Fill Reservoir Tank - Leibinger JET2 neo Manual

Group 5

5.4.2 Fill reservoir tank

To avoid damages of the device during the transportation the reservoir tanks should
be evacuated and have to be filled before the initial operation.
Caution – Danger of explosion!
Before filling the device with the consumables, measures for the electrostatic
discharge have to be made!
The operator can carry out a discharge either by the direct touching of the JET2 neo
cabinet or by standing with the appropriate ESD-shoes on an grounded surface!
Dangerous material in the machine!
Danger of serious damage through burns, skin irriation and poisoning! Read the
safety leaflets and the regulations on personal safety equipment!
The two reservoir tanks are always unpressurized and can be opened in every
device condition – also during the production.
The reservoir tanks and the sealing cap are color-coded and labelled to avoid any
mistakes in filling. Additionally the sealing caps are marked with the ink-no. or
solvent-no. which are admissible for the device.
For correct handling the LEIBINGER re-filling system allows an odor- and splash free
refilling of the consumables. Inks and solvent made by Paul Leibinger GmbH & Co.
KG are identified by TAGs. The TAG is located below the label of each re-fill bottle.
The LEIBINGER JET2 neo is equipped with a TAG reader to read the TAG codes.
JET2 neo
Transport/Start up
(Step 2)
Page 39
Release R1.07 en