Leibinger JET2 neo Manual page 59

Group 6
Menu bar (4): The appropriate menus or specific functions of the JET2 neo can be
opened with the buttons in the menu bar. The following buttons are available:
Figure 16
Menu bar
4.1
Pos. Button
4.1 Edit current Job
4.2 Load job to print
4.3 Main menu
4.4 Macro 1
4.5 Macro 2
If a button appears in grey, it is not available at the moment.
Example:
available
The two <Macro...> buttons can be freely defined to call frequently used menus or
functions directly for example.
Further information about the macro buttons can be found in the
chapter Macro generator (page 117)!
Status field <Printing speed> (5): In this field the current reached printing speed as
well as the max. possible printing speed under consideration of the made settings are
displayed. The display is carried out in the measurement m/min or inch/min, de-
pending on the selected adjustments in the basic settings.
JET2 neo
Operation – Elements and procedures
4.2
Description
Editor with the current loaded job opens.
Job selection menu opens.
Main menu opens
Freely definable button 1
Freely definable button 2
4.3
4.4
not available
Page 57
4.5
Release R1.07 en