Leibinger JET2 neo Manual page 42

Page 40
Proceeding:
Now proceed absolutely according to the instructions in the chapter Execution of
the Tag-activation and refilling (page 257) in the group Equipping/Maintenance.
You will find supplementary information about the TAG-reader in the
chapter TAG-reader (page 257).
Release R1.07 en
Transport/Start up
Inflammable (Risk of fire)!
Combustible gases and liquids cause serious burns. Sources of
ignition must be kept away from the device!
Attention!
Before the filling process a static discharge has to be carried out
necessarily! For this you have to touch the cabinet of the printer
directly or you have to stand with ESD-shoes on an grounded
surface before the filling or during the process!
The sealing of the refill bottle should be not opened!
Group 5
JET2 neo