Q172Ex Serial Absolute Synchronous Encoder Interface Module - Mitsubishi Electric Q173CPU User Manual

2 SYSTEM CONFIGURATION

2.4.5 Q172EX Serial absolute synchronous encoder interface module

Q172EX receive external signals required for serial absolute synchronous encoder.
(1) Q172EX/Q172EX-S1/Q172EX-S2/Q172EX-S3 name of parts
5)
8)
6)
9)
(Note): The installation position of Q172EX-S2/Q172EX_S3 is only CPU base unit.
No.
Name
1) Module fixing hook
2) Mode judging LED
3) SY. ENC connector
4) Module loading lever
Module fixing screw
5)
hole
6) Module fixing hook
7) Battery connector
8) Battery holder
Battery
9)
(A6BAT/MR-BAT)
7)
Hook used to fix the module to the base unit.
(Quick release installation)
Display the input status from the external equipment.
LED
Indicates to display the signal input status of
SY.ENC each serial absolute synchronous encoder.
1, 2 (When the serial absolute synchronous encoder
cable connected property, LED is turned on.)
TREN Indicates to display the signal status of tracking
1, 2 enable.
Input connector of the serial absolute synchronous encoder.
Used to install the module to the base unit.
Hole for the screw used to fix to the base unit
(M3×12 screw : Purchase from the other supplier)
Hook used to fix to the base unit.
For connection of battery lead wire.
Used to the Install the Battery (A6BAT/MR-BAT) to the holder.
For Serial absolute synchronous encoder battery backup.
2 - 51
Q172EX
SY.ENC TREN
1 1
2 2
SY.ENC1
SY.ENC2
Q172EX
Application
Details
1)
2)
3)
4)