Panasonic VL-V900 Installation And Operating Instructions Manual page 36

4. Installation
Binary signalling example
Control box
Lift controller
A
*1 The number 2–7 switches must always be set to the "off" position.
The number 8 DIP switch determines whether connections are normally open (switch is in the "off" position) or
normally closed (switch is in the "on" position).
4.5.6 Extension box switch settings
The extension box's DIP switches are only used when configuring settings for the extension box and lobby stations
connected to the extension box.
When settings are completed, make sure to set all of the DIP switches to the "off" position.
See 5.6.2 Extension box DIP switch settings (Page 56) for information on DIP switch settings when configuring
extension box settings.
36
*1
DIP switch
ON
OFF
1 2 3 4 5 6 7 8
A
Floors
0–99
(0 is the ground floor)
8