Panasonic VL-V900 Installation And Operating Instructions Manual page 17

Whole system capacity
Distribution Box (VL-V701)
Power source
Power consumption
Dimensions (mm)
(height ´ width ´ depth)
Mass (weight)
Operating environment
Installation method
External material
Connectivity
Lift Controller (VL-V702)
Power source
Power consumption
Dimensions (mm)
(height ´ width ´ depth)
Mass (weight)
Operating environment
USB
USB 2.0, standard-B connector
SD card
4–64 GB SDHC / SDXC memory card is supported
R Lobby station (VL-V900): up to 3
R Main monitor (VL-MW251, VL-MVN511, VL-MV26, VL-MWD272,
VL-MWD273, VL-MV71, VL-MV72): up to 560
(The maximum, for each branch, 7 distribution boxes, 1 repeater, and 140
main monitors can be connected.)
R Lift controller (VL-V702): up to 3 branches, totally up to 15 lift controllers
R Guard stations: up to 4 (in case of connecting to the PBX system)
Power supply unit (VL-PS240: 220 – 240 V AC, 0.2 A, 50 / 60 Hz)
24 V DC, 0.1 A
Standby: Approx. 1.2 W
Operating: Approx. 2.0 W
Approx. 210 ´ 108.5 ´ 52.5 (excluding protruding sections)
Approx. 400 g
Ambient temperature: approx. -10 °C to +50 °C
Ambient temperature for power supply unit: approx. 0 °C to +50 °C
Relative humidity: up to 90% (non-condensing)
Indoor installation only
Wall mount or attach to DIN rail
ABS (flame retardant ABS resin)
To main monitor
Number of connectable stations: 20
Wire: 1 pair PE insulation, thickness of one conductor is from 0.65 – 1.2 mm
Distance: up to 200 m (in case of 1.2 mm thickness)
To control box
Number of connectable stations: 1
Wire: 2 pair PE insulation, thickness of one conductor is from 0.65 – 1.2 mm
Distance: up to 200 m (in case of 1.2 mm thickness)
To distribution box
Number of connectable stations: 1
Wire: 2 pair PE insulation, thickness of one conductor is from 0.65 – 1.2 mm
Distance: up to 200 m (in case of 1.2 mm thickness)
Power supply unit (VL-PS240: 220 – 240 V AC, 0.2 A, 50 / 60 Hz)
24 V DC, 0.2 A
Standby: Approx. 0.4 W
Operating: Approx. 4.4 W
Approx. 210 ´ 108.5 ´ 52.5 (excluding protruding sections)
Approx. 400 g
Ambient temperature: approx. -10 °C to +50 °C
Ambient temperature for power supply unit: approx. 0 °C to +50 °C
Relative humidity: up to 90% (non-condensing)
Indoor installation only
3. Preparation
17