Panasonic VL-V900 Installation And Operating Instructions Manual page 43

Control Box — General settings
Parameter
Monitor Time Out
Talk Time Out
Camera Signal
Lift Signal Mode
Lift Signal Time
Visitor Call Mode
Terminal 1–4 Extension Number
Terminal 1–4 Name Code
Description and available settings
Determines the amount of time that passes when
watching camera images before the standby screen is
displayed.
[0]: 180 SEC
[1]: 90 SEC
[2]: 60 SEC
[3]: 30 SEC
Determines the amount of time that passes when
talking before the standby screen is displayed.
[0]: 90 SEC
[1]: 60 SEC
[2]: 30 SEC
[3]: 180 SEC
[4]: 300 SEC
Tells the system what signal format is used by the
external camera.
[0]: PAL
[1]: NTSC
Determines the signalling method used by the lift
controller to communicate with the lift. Select the signal
type according to the specifications of the lift.
[0]: RELAY
[1]: BINARY
After a visitor is admitted, this setting determines the
amount of time that the visitor can use the lift to visit the
corresponding floor.
If the lift has a similar setting, set this parameter to any
value other than "0"; the lift setting will take priority.
(1–900 SEC, or 0 to disable)
Determines if visitors can call rooms directly or if their
calls are directed to a reception terminal.
[0]: ROOM MODE
[1]: RECEPTION MODE
Tells the system the extension number for terminal 1–
4.
(24 digits max.)
Determines the name for terminal 1–4.
[1]: TERMINAL #
[2]: RECEPTION
[3]: GATE
[4]: CONTROL ROOM
[5]: RESTAURANT
[6]: HALL
[7]: POOL
[8]: SECURITY OFFICE
[9]: ENTRANCE
[10]: GYM
[11]: GUEST ROOM
[12]: KID'S ROOM
[13]: PARKING
[14]: TERRACE
[15]: LIFT LOBBY
5. Programming
Default
0
(180 SEC)
0
(90 SEC)
0
(PAL)
0
(RELAY)
300
(300 SEC)
0
(ROOM MODE)
—
1
(TERMINAL #)
43