Introduction; System Overview - Panasonic VL-V900 Installation And Operating Instructions Manual

1.1 System overview

This document explains how to install and configure a Video Intercom System for Apartment Complexes comprised
of the following devices.
R VL-V900 Lobby Station
R VL-V700 Control Box
R VL-V701 Distribution Box
R VL-V702 Lift Controller
R VL-V703 Extension Box
Additionally, general information is provided for connecting other devices to the system.
1.1.1 Main features
Large-capacity, expandable
R The system supports up to 560 room units (main monitors) and 3 lobby stations.
R Optional devices such as cameras, access controllers (door openers, key switches, card scanners, etc.), electric
locks, and a TV monitor can be connected.
R The system can be integrated with a PBX system used by facility staff.
R Extension boxes can be used to increase the number of lobby stations that can be used in the system. Up to 3
extension boxes can be connected to the control box, and up to 6 lobby stations can be connected to each
extension box.
Easy to configure and maintain
R System settings can be configured in advance using a computer, and uploaded on-site via USB connection.
R System settings can be configured on-site using a lobby station, main monitor, and PBX extension telephone.
R System events can be logged on an optional SD card.
Convenient features for residents, visitors, and facility staff
R The system can be used in "room mode" (visitors can call rooms directly) or "reception mode" (visitors calls are
routed through a receptionist).
R Visitors can use a lobby station to call residents or facility staff.
R Residents can use their room units (main monitors) to monitor lobby stations and optional cameras, and can allow
visitors to enter the lobby and lift.
R Residents can use their main monitors to make emergency calls to facility staff. (VL-MVN511 or other compatible
main monitor is required.)
R Facility staff can make and receive calls to and from residents and visitors.

1. Introduction

3