Lobby Station Programming - Panasonic VL-V900 Installation And Operating Instructions Manual

Parameter
Camera Name
Camera Display Priority
Camera Switching Image
Wide/Zoom
Zoom Position
Power Frequency
Access Code

5.3 Lobby station programming

You can use a lobby station to configure various system settings.
1
Register the lobby station (page 24).
R If you have already registered the lobby station, skip this step.
Description and available settings
Determines the camera name.
[1]: CAMERA #
[2]: RECEPTION
[3]: GATE
[4]: CONTROL ROOM
[5]: RESTAURANT
[6]: HALL
[7]: POOL
[8]: SECURITY OFFICE
[9]: ENTRANCE
[10]: GYM
[11]: GUEST ROOM
[12]: KID'S ROOM
[13]: PARKING
[14]: TERRACE
[15]: LIFT LOBBY
Determines which camera image is displayed when
monitoring begins.
[0]: LOBBY
[1]: CAMERA
[2]: CAMERA ONLY
Determines whether visitors (lobby station users) can
switch between the lobby station camera and the
external camera.
[0]: NO
[1]: YES
Determines whether camera images are displayed in
wide mode or in zoom mode when monitoring begins.
[0]: WIDE
[1]: ZOOM
Determines the camera zoom position.
[1]: UPPER LEFT
[2]: UPPER SIDE
[3]: UPPER RIGHT
[4]: LEFT
[5]: CENTRE
[6]: RIGHT
[7]: LOWER LEFT
[8]: LOWER SIDE
[9]: LOWER RIGHT
Tells the system what frequency of power is supplied
to the lobby station.
[0]: 50 HZ
[1]: 60 HZ
Determines the access code that allows you to use
lobby stations to configure the system.
(6 digits)
5. Programming
Default
1
(CAMERA #)
0
(LOBBY)
0
(NO)
0
(WIDE)
5
(CENTRE)
0
(50 HZ)
123456
45