System Log - Panasonic VL-V900 Installation And Operating Instructions Manual

5. Programming
5.6.2 Extension box DIP switch settings
DIP switch settings for uploading settings
The DIP switches of the extension box are used to determine which lobby station settings are uploaded to when
configuring lobby station settings.
DIP switch
ON
OFF
1 2 3 4 5 6 7 8
ON
OFF
1 2 3 4 5 6 7 8
ON
OFF
1 2 3 4 5 6 7 8
ON
OFF
1 2 3 4 5 6 7 8
ON
OFF
1 2 3 4 5 6 7 8
ON
OFF
1 2 3 4 5 6 7 8
Turning off DIP switches
Under normal operations, set all the DIP switches to "off" as shown below after uploading settings to lobby stations
is completed.
DIP switch
ON
OFF
1 2 3 4 5 6 7 8

5.7 System log

You can insert an SD into the control box and use it to log system event information. The following information can
be logged.
– Caller and called party information (lobby station number, room number, terminal number, etc.)
– Whether the 2 parties talked
– Whether a door was unlocked or a lift was used
– The date and time for all events
– Images from lobby station cameras (captured when the lobby station called a room number)
Important:
R An SD card must be inserted into the control box in order to use this feature.
R Before inserting an SD card into the control box, format the card using the tool described in "Formatting
the SD card".
R Once the system is installed and functioning, view the system log to confirm that information is being
logged.
Note:
R Up to 90000 image files can be logged, after which new image files will overwrite old ones.
56
Lobby station that settings are uploaded to
(off)
1st lobby station
2nd lobby station
3rd lobby station
4th lobby station
5th lobby station
6th lobby station