Instructions For The Installer - eka EKF 464 TC Original Operating And Instruction Manual

Electronic convection oven rev. 5 _________________________________________MODELS EKF 464 TC – EKF 511 TC
2.1 Technical data plate (example)
SERIAL NUMBER
The "technical data" plate is located on the side of the appliance.
2.2 Technical features
Overall dimensions:
Weight:
Maximum load per tray GN1/1-600x400mm
Maximum load GN1/1-600x400mm
Electrical power:
Maximum electrical power:
Electrical insulation class:
Casing protection degree:
Water pressure:
Power supply voltage:
Power supply cable section:
Power supply cable type:
Power supply cable connection:
The noise level of the appliance in operation is less than 70 dB (A).

3. Instructions for the installer

The following instructions are aimed at the skilled installer for them to perform installation,
electrical and water connection operations in the most correct manner and according to the safety
regulations in force in the place of installation of the appliance. The manufacturer shall not be
liable for damage or harm to persons, pets or property arising from installation errors. Nor are they
responsible for any appliance breakage caused by faulty installation.
3.1 Storage
In the event the appliance has been warehoused at temperatures below 0°C (maximum allowed –
5°C), it must be brought back to a temperature of at least +10°C before operating it.
3.2 Transport of the appliance
During transport the appliance must be left in its packaging in order to protect it from any
external damage.
The weight of the appliance must also be taken into account in order to prevent overturning.
_________________________________________________________________________________________ page 5
EKF 464 TC
5214010500
400V 3N 50/60 Hz

400V 3N 50/60
kPa 100 - 200
Hz
Height (with feet)
width
depth
Convection resistors
8 kW
IPX5
cm 74,5
cm 93,5
cm 93
kg 85
kg 4 - 2
kg 20 - 8
kW 7,5
kW 8
I
IPX5
kPa 100 – 200
400V 3N 50/60 Hz
5G 2,5 (5 x 2,5 mm
H07RN-F
Tipo : Y
CERTIFICATION
2
)