eka EKF 616 TC Original Operating And Instruction Manual

eka EKF 616 TC Original Operating And Instruction Manual

Advertisement

ORIGINAL OPERATING AND INSTRUCTION MANUAL
MODELS EKF 616 TC – EKF 664 TC – EKF 711 TC
EKF 1016 TC – EKF 1064 TC – EKF 1111 TC
EKF 1664 TC – EKF 2011 TC
EKF 1064 TC/0/029 – EKF 1111 TC/1/029
rev. 11
TECNOEKA S.r.l.
Via Marco Polo, n.11 - 35010 Borgoricco (Padova) Italy
Tel. +39.049.9300344 – +39.049.5791479 Fax +39.049.5794387
www.tecnoeka.com
E-mail: info@tecnoeka.com

Advertisement

Table of Contents
loading

Summary of Contents for eka EKF 616 TC

  • Page 1 ORIGINAL OPERATING AND INSTRUCTION MANUAL MODELS EKF 616 TC – EKF 664 TC – EKF 711 TC EKF 1016 TC – EKF 1064 TC – EKF 1111 TC EKF 1664 TC – EKF 2011 TC EKF 1064 TC/0/029 – EKF 1111 TC/1/029 rev.
  • Page 2 Purpose of the product Cooking food Model EKF 616 TC– EKF 664 TC– EKF 711 TC EKF 1016 TC– EKF 1064 TC– EKF 1111 TC EKF 1664 TC – EKF 2011 TC - EKF 1064 TC/0/029 – EKF 1111 TC/1/029...
  • Page 3: Table Of Contents

    Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC Contents Technical service General information...
  • Page 4: Technical Service

    TECNOEKA Srl ___________________________________________________________ operating and instruction manual 1. Technical service For periodic maintenance checks and repairs, contact your nearest Support Centre and only use original spare parts. Failure to comply with this provision shall forfeit the warranty right. 2. General information It is essential for this instruction manual to be stored together with the appliance for future referencing;...
  • Page 5: Instructions For The Installer

    Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 2.1 Technical data plate (example)
  • Page 6 TECNOEKA Srl ___________________________________________________________ operating and instruction manual 3.1 Storage In the event the appliance has been warehoused at temperatures below 0°C (maximum allowed – 5°C), it must be brought back to a temperature of at least +10°C before operating it. 3.2 Transport of the appliance During transport the appliance must be left in its packaging in order to protect it from any external damage.
  • Page 7 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 3.6.1 Table top oven placement The appliance must be placed in a perfectly horizontal position on a table or similar support;...
  • Page 8 TECNOEKA Srl ___________________________________________________________ operating and instruction manual Installation and connection drawings MODELS EKF 616 TC – EKF 664 TC – EKF 711 TC 1 USB PORT 3 SOCKET FOR CORE PROBE CONNECTION 4 WATER DRAIN PIPE (DN30) 5 WASHING WATER INLET 6 SOFTENED WATER INLET (THREADED SOLENOID VALVE¾”)
  • Page 9 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC MODELS EKF 1016 TC – EKF 1064 TC – EKF 1111 TC...
  • Page 10 TECNOEKA Srl ___________________________________________________________ operating and instruction manual Installation and connection drawings MODELS EKF 1664 TC – EKF 2011 TC 1 USB PORT 3 SOCKET FOR CORE PROBE CONNECTION 4 WATER DRAIN PIPE (DN30) 5 WASHING WATER INLET 6 SOFTENED WATER INLET (THREADED SOLENOID VALVE¾”) 7 DRAIN PIPE COOLING WATER INLET 8 STEAM VENT 9 POWER SUPPLY CABLE RETAINER...
  • Page 11 3.8 Power supply cable connection (Modd. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1064 TC –EKF 1064 TC – EKF 1111 TC ) Remove the back and left side of the appliance to access the power supply terminal board.
  • Page 12 TECNOEKA Srl ___________________________________________________________ operating and instruction manual 3.8 Power supply cable connection (Models EKF 1664 TC – EKF 2011 TC) Remove the lower back of the appliance to access the power supply terminal board. Loosen the cable retainer located on the rear of the back (see Fig.1) and run the cable through it. The cable must also go through the suitable hole on the electrical components panel, until reaching Prepare conductors for connection with the terminal board so that the earth conductor is the last to be extracted from its terminal in the event the cable should be abnormally pulled.
  • Page 13 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 3.10 Water drain A drain pipe comes out of the rear of the appliance (see Fig.1) to drain the cooking chamber.
  • Page 14: Instructions For The User

    TECNOEKA Srl ___________________________________________________________ operating and instruction manual 4. Instructions for the user 4.1 General information Use the appliance at room temperature between +5°C and +25°C. 35°C may be reached occasionally. The temperature of the appliance's external surfaces may exceed 60°C, only touch control elements.
  • Page 15 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC Only for mod. EKF 1664 TC e mod. EKF 2011 TC (wheeled models)
  • Page 16 TECNOEKA Srl ___________________________________________________________ operating and instruction manual 4.2 Control panel LCD DISPLAY INCREASE PARAMETER VALUE DECREASE PARAMETER VALUE CONFIRM PARAMETER VALUE STEP/PARAMETER SELECTION AIR FLOW SPEED SETTING "PRE-HEATING" SETTING GENERAL SETTINGS MENU PROGRAMMING ACCESSORIES RECIPE BOOK START/STOP page 16 _____________________________________________________________________________________________...
  • Page 17 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 4.3 “Touch” control operation The “TOUCH”...
  • Page 18 TECNOEKA Srl ___________________________________________________________ operating and instruction manual Only for mod. EKF 1664 TC e mod. EKF 2011 TC (wheeled models) These models are equipped with a special mobility system (patented) of the internal door glass. The system allows you to “slide” the internal glass down or up, according to the application needs.
  • Page 19 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC Glass “down” and door open with tray trolley in With tray trolley in, the display shows the RED/BLUE SCREEN (flashing) with the words “LIFT...
  • Page 20 TECNOEKA Srl ___________________________________________________________ operating and instruction manual 4.3.3 Parameter setting 4.3.3.1 Cooking TIME setting (Parameter screen) With the “STEP” key the following may be set: 1. TIME 2. PAUSE 3. MAINTENANCE 1. TIME The parameter is settable from a minimum of 0h 01’ to 9h 59’ maximum. In the event of MANUAL mode cooking cycle, in STEP 1 it is possible to also set an “INF”...
  • Page 21 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 3. DELTA T Value The core probe is not standard supplied but is an optional accessory) 1.
  • Page 22 TECNOEKA Srl ___________________________________________________________ operating and instruction manual Use the “STEP” key to select the DELTA T parameter Use the “SELECT” key (the display shows the PARAMETER SCREEN); Use the “STEP” key to select the TEMPERATURE IN COOKING CHAMBER parameter Use the “SELECT” key.
  • Page 23 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 4.3.3.5 AIR FLOW SPEED setting (Overview screen)
  • Page 24 TECNOEKA Srl ___________________________________________________________ operating and instruction manual touch key . The red OVERVIEW SCREEN is displayed reading STEP 2 (the red background warns that the TIME parameter has not been set and therefore the selected step cannot be operative). Touch key “STEP” to select the TIME parameter then touch keys to set the...
  • Page 25 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC MAINTENANCE (“ON” or “OFF”) Touch the “SELECT”...
  • Page 26 TECNOEKA Srl ___________________________________________________________ operating and instruction manual Touch the “SELECT” key to confirm the set values. From PARAMETER SCREEN TEMPERATURE IN CHAMBER Use the keys to set the desired value. Touch the “STEP” key to select the "CORE TEMPERATURE" parameter and touch keys to set the desired value.
  • Page 27 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 4.3.6.3 Cooking cycle with core temperature and Delta T From "TIME"...
  • Page 28 TECNOEKA Srl ___________________________________________________________ operating and instruction manual From PARAMETER SCREEN “% HUMIDITY/STEAM” (optional function) After setting the value of the “DELTA T” parameter, use the “SELECT” key: the “% HUMIDITY/STEAM” parameter screen is displayed. Use the keys to set the desired value.
  • Page 29 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC Use the “STEP” key to choose the type of product (icon with box) where to “save” the recipe.
  • Page 30 TECNOEKA Srl ___________________________________________________________ operating and instruction manual key to select the recipe (name) to be “downloaded”. Use the “SELECT” key to confirm the selection (the overview screen of the selected recipe's cooking cycle is displayed). Use the key to enter the “PROGRAMMING MENU” screen. Use the “STEP”...
  • Page 31 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC Important Every operation must be done within 5”; after this time the overview screen of the cooking cycle is automatically displayed.
  • Page 32 To use a program/recipe ( see paragraph 15 “RECIPE BOOK” ): Use the key with symbol to bring up the “EKA RECIPE BOOK” screen. Use the “STEP” key to select the word “CHEF” (the “CHEF RECIPE BOOK” screen is displayed). Use the “SELECT”...
  • Page 33 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC Use the “SELECT” key to bring up the overview screen of the last executed cooking cycle, which can be started by pressing the “START/STOP”...
  • Page 34 TECNOEKA Srl ___________________________________________________________ operating and instruction manual When the cooking cycle is completed the “HACCP” function is automatically disabled. DISPLAY “HACCP” DATA (ON PC) To display on the PC the parameters of an executed cookign cycle: press the “START/STOP” key for few seconds and switch off the oven remove the “USB pen drive”...
  • Page 35: Settings Menu

    Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC POSSIBLE ERRORS OF “HACCP” FUNCTION...
  • Page 36: Accessories Menu

    TECNOEKA Srl ___________________________________________________________ operating and instruction manual English language pre-set) LANGUAGE SELECTION ( Use the “SELECT” key : the “LANGUAGES” screen is displayed. Use the “STEP” key to select the desired language. Use the “SELECT” key to confirm it. Every operation must be done within 5”; after this time the overview screen of the cooking cycle is automatically displayed.
  • Page 37 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 8.2 Cleaning the cooking chamber 8.2.1 Manual cleaning...
  • Page 38 TECNOEKA Srl ___________________________________________________________ operating and instruction manual Important It is recommended to use the program “P” when first using the “KWT” washing system. In this way the air inside the peristaltic pumps and the detergent and rinse aid tubes is removed, thus assuring correct system operation.
  • Page 39: Maintenance

    Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC paying special attention to removing any salt residues which might lead to corrosion on the steel surfaces.
  • Page 40: Possible Faults

    TECNOEKA Srl ___________________________________________________________ operating and instruction manual 10 Possible faults Type of fault Cause of the fault Corrective action - Non conforming connection to the - Check connection to the mains power mains Control panel totally off - Mains voltage not present - Restore power supply voltage (the oven does not work) - Electronic board protection fuse...
  • Page 41 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC - The oven is - Use the “SELECT”...
  • Page 42 TECNOEKA Srl ___________________________________________________________ operating and instruction manual 12 Wiring diagrams MODELS EKF 616 TC – EKF 664 TC – EKF 711 TC Power supply terminal board LED Bar Power Supply Unit B1-B2-B3-B4 Contactor coils LED Bar Relay coil Door microswitch...
  • Page 43 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC MODELS EKF 1016 TC – EKF 1064 TC – EKF 1111 TC...
  • Page 44 TECNOEKA Srl ___________________________________________________________ operating and instruction manual MODEL EKF 1064 TC/0/029 - EKF 1111 TC/1/029 Power supply terminal board LED Bar Power Supply Unit B1-B2-B3-B4 Contactor coils LED Bar Relay coil Door microswitch R1-R2-R3 Circular resistors E1-E2-E3 Water solenoid valves Safety thermostat Cooking chamber probes C1-C2-C3...
  • Page 45 Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC MODELS EKF 1664 TC – EKF 2011 TC...
  • Page 46 TECNOEKA Srl ___________________________________________________________ operating and instruction manual MODELS EKF 1664 TC – EKF 2011 TC Control diagram Power supply terminal board Relay coil Line 1 Phase Terminal V6-V7 Cooling motorfans Line 2 Phase Terminal LED Bar Power Supply Unit Line 3 Phase Terminal LED Bar Neutral Terminal Safety thermostat...
  • Page 47: Technical Support

    Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 13. Technical support Before leaving the factory this appliance has been calibrated and tested by experienced and skilled personnel in order to obtain the best operation results.
  • Page 48 TECNOEKA Srl ___________________________________________________________ operating and instruction manual DESSERTS VEGETABLES BEIGNETS ROAST POTATOES CHOCOLATE CUPCAKES FRIED POTATOES (FROZEN) MUFFINS MIXED STEAMED VEGETABLES SPONGE CAKE RATATOUILLE FLAKY PASTRY FRENCH BEANS BISCUITS SPINACH (FROZEN) FRUIT TART CROISSANTS (FROZEN) the success of recipes may vary according to quantity, layout (food orientation with Important: respect to the air flow) and piece size of the food to be cooked.
  • Page 49: Availability And Supply Of Spare Parts

    Electronic convection oven rev. 11 ________________MODD. EKF 616 TC – EKF 664 TC – EKF 711 TC – EKF 1016 TC EKF 1064 TC – EKF 1111 TC – EKF 1664 TC – EKF 2011 TC 9) Damage or defect caused by negligent and / or reckless of the product, or in contrast with the instructions prescribed by the instruction and maintenance manual.

Table of Contents