Technical Service; Instructions For The Installer; Storage; Transportation Of The Appliance - eka EKF 412 NALU Original Operating And Instruction Manual

COOKING TIPS
• In placing the food in the cooking chamber, maintain a space of at least 40 mm between trays
in order not to excessively obstruct air circulation.
• Do not use trays with sides higher than necessary: the sides form barriers that prevent hot air
circulation.
• Preheat the oven every time before cooking to achieve top performance.
• For cooking as consistently as possible, spread the food evenly in every tray taking into account
its size, layer or thickness.
• Avoid adding salt to food in the cooking chamber.
• To check correct progress of the cooking cycle use the chamber's internal lighting: avoid
uselessly opening the door, which causes wastes of energy and longer cooking times.
RESIDUAL RISKS
• After baking open the door with caution, to avoid the violent outflow of heat which might cause burns.
• During oven operation pay attention to hot areas of its outer surfaces (marked on the appliance).
• Do not use the door handle to move the appliance (possible glass breakage).
• The supporting bench must be able to withstand the weight of the machine and house it correctly.
• The appliance is fitted with electrical parts and must never be washed with a water or steam jet.
• The appliance is electrically connected: disconnect the power supply before performing any type of
cleaning.
• To avoid incorrect connections of the appliance, the relevant electrical/water connections are marked on
the appliance by suitable identification plates.
• When the tilting door is wide open, there is the risk that things could be placed on the surface with the
risk of irreparably damaging the door hinges.

1. TECHNICAL SERVICE

• It is essential for this instruction manual to be stored together with the appliance for future referencing;
in the event of misplacing it, a copy must be obtained directly from the manufacturer.
• This information has been prepared for your safety and that of others; therefore we kindly ask you to
read it carefully before installing and using the appliance.
• For periodic maintenance checks and repairs, contact your nearest Technical Support Centre and only
use original spare parts. Failure to comply with this provision shall forfeit the warranty right.
• All installation and commissioning operations must exclusively be performed by technically skilled
installers, in compliance with the instructions of the Manufacturer and in compliance with national
standards in force.
• The "technical data" plate is located on the side panel of the appliance.
Note: The inappropriate or incorrect use of the appliance and failure to comply with installation rules shall
invalidate any liability by the Manufacturer.

2. INSTRUCTIONS FOR THE INSTALLER

The following instructions are intended for skilled installers, to perform installation, electrical and water
connection operations in the most correct manner and according to the safety regulations in force in the
country of installation of the appliance.
The Manufacturing Company shall not be liable for damage or harm to persons, pets or property arising
from installation errors. Nor are they responsible for any appliance breakage caused by faulty installation.

2.1 Storage

If the appliance is stored in a warehouse, the ambient temperature must never drop below 0°C. Before
switching on the appliance it must be brought to a temperature of

2.2 Transportation of the appliance

During transportation the appliance must be left in its packaging in order to protect it from any external
damage.
The weight of the appliance must also be taken into account in order to prevent overturning.
at least +10°C.