Technical Service; General Information - eka EKF 464 TC Original Operating And Instruction Manual

TECNOEKA Srl ___________________________________________________________ operating and instruction manual

1. Technical service

For periodic maintenance checks and repairs, contact your nearest Support Centre and only use
original spare parts. Failure to comply with this provision shall forfeit the warranty right.

2. General information

It is essential for this instruction manual to be stored together with the appliance for future
referencing; in the event of misplacing it, a copy must be obtained directly from the manufacturer.
This information has been prepared for your safety and that of others; therefore we kindly ask you
to read it carefully before installing and using the appliance.
If upon reception of the goods the packaging should not be intact or should it be damaged, affix
the following wording: "GOODS SUBJECT TO CHECK", with the specification of the damage and
countersigned by the driver; file a written complaint with the seller within 4 calendar days (not
business days) from the date of delivery, after which no complaints shall be accepted.
The appliance is intended for professional use in institutional and professional kitchens and must
only be used by skilled personnel who have been trained on its proper use. For safety reasons the
appliance must be supervised during operation.
The appliance is not intended to be used by children and/or persons with impaired physical,
sensory or mental abilities, or who lack experience or knowledge, unless they are supervised by a
person responsible for their safety, or who has been instructed on using the appliance.
It is hazardous to modify or attempt to modify the features of this appliance.
The appliance must never be cleaned with direct water or steam jets, since any ingress of water
might affect its safety.
Before maintenance or cleaning disconnect the appliance from the power supply mains and let it
cool. In the event of failure or poor operation, switch off the appliance, close the water supply
cock, disconnect the power supply and contact an authorised Service Centre.
Any modification to the electrical system that might be required to be able to install the appliance
must be carried out by competent personnel only.
All installation and commissioning operations must be exclusively be performed by technically
skilled installers, according to the manufacturer's instructions and in compliance with national
standards in force
.
For periodic maintenance checks and repairs, contact your nearest Support Centre and only use
original spare parts. Failure to comply with this provision shall forfeit the warranty right.
Note: The inappropriate or incorrect use and failure to comply with installation rules shall
invalidate any liability by the Manufacturers. In this connection, the instructions laid out under
"POSITIONING" (paragraph 3.6) must be strictly complied with.
page 4 _____________________________________________________________________________________________