Table of Contents
Advertisement
Electronic convection oven rev. 5 _________________________________________MODELS EKF 464 TC – EKF 511 TC
Touch the key "SELECT"
to confirm the selection: "ST" is displayed in the overview screen in
the direction of the icon indicating motor speed.
Fan speed may be modified also while baking in "semi-static" mode.
Operate as follows (from OVERVIEW SCREEN):
touch the key
and the display shows the screen "AIR FLOW SPEED SETTING".
Touch keys
and
to set the desired speed.
Touch key "SELECT"
to confirm the selection.
4.3.4 Selection of cooking steps
(Overview screen)
Each cooking cycle may consist of up to 9 STEPS. The desired parameters may be set for each step.
To move from one step to the next one, after setting STEP 1, act as follows:
touch key "STEP"
to select STEP 1 (word highlighted on dark box);
touch key
. The red OVERVIEW SCREEN is displayed reading STEP 2 (the red background warns
that the TIME parameter has not been set and therefore the selected step cannot be operative).
Touch key "STEP"
to select the TIME parameter
then touch keys
and
to set the
desired value.
As soon as the TIME parameter is set, the background of the OVERVIEW SCREEN turns blue to
indicate that STEP 2 has become operative. Complete setting the values of the other desired
parameters. To move to the following steps (STEP 3, STEP 4 ...) repeat the same operations
described for STEP 2.
Upon completing step setting, start the cooking cycle with the "START/STOP"
key.
The display shows the OVERVIEW SCREEN of STEP 1 of the cooking cycle and the overall number
of steps it consists of. (E.g. 1/5 means that STEP 1 of the total 5 set is active).
Next to the TIME parameter: the "count-down" of the active step is shown on the left and the
overall time of all cooking cycle steps is shown on the right.
In the event of "manual" baking the display shows the word "MANUAL", in case of
"programmed" baking, the name of the stored recipe (program) is displayed.
4.3.5 Starting/stopping the cooking cycle
Once the desired cooking parameters are set, to start the cycle touch the "START/ STOP"
key.
To stop the cooking cycle at any time touch the "START/ STOP"
key again for a few
seconds.
When a cooking cycle is completed ( in "manual" mode or in "programmed" mode) a buzzer
goes off ("beep") for 30'' and at the same time the words flash on the screen : "COOKING
COMPLETED".
If during this period the
key is activated, the OVERVIEW SCREEN
of the cooking cycle just ended is displayed again. The cooking cycle is automatically reactivated
for 1 MINUTE. To lengthen the cooking time just touch the "STEP"
key and select the TIME
parameter
; then touch the key
to set the desired value.
_________________________________________________________________________________________ page 17
Hide quick links:
Advertisement
Table of Contents
