eka EKF 464 TC Original Operating And Instruction Manual page 15

Electronic convection oven rev. 5 _________________________________________MODELS EKF 464 TC – EKF 511 TC
When the OVERVIEW SCREEN shows the TEMPERATURE IN CHAMBER parameter
CORE TEMPERATURE parameter
- Use the "STEP"
- Use the "SELECT" key
- Use the "STEP"
- Use the "SELECT"
At the end of these operations the display will show the red OVERVIEW SCREEN (if the
PREHEATING function is not set) to indicate the TIME parameter is missing ("00.00").
3. DELTA T VALUE
Use the keys and
confirm the choice with the
With "BAKING IN PROGRESS": the display shows the set temperature in the direction of
the actual temperature detected by the core probe in the direction of the symbol
The display shows the set temperature in the direction of the symbol
temperature detected in the cooking chamber in the direction of the symbol
When the OVERVIEW SCREEN shows the CORE TEMPERATURE parameter
parameter , to go back to setting the TIME parameter
- Use the "STEP"
Use the "SELECT" key
-
- Use the "STEP"
- Use the "SELECT"
At the end of these operations the display will show the red OVERVIEW SCREEN (if the
PREHEATING function is not set) to indicate the TIME parameter is missing ("00.00").
4.3.3.3 HUMIDITY/STEAM setting(Parameter screen)
Use the keys e
100%). After that confirm the choice with the "SELECT"
_________________________________________________________________________________________ page 15
, to go back to setting the TIME parameter
key to select the CORE TEMPERATURE parameter
(the display shows the PARAMETER SCREEN);
key to select the TEMPERATURE IN COOKING CHAMBER parameter
key.
to increase or decrease the temperature (from 0°C to 100°C). After that
key.
"SELECT"
key to select the DELTA T parameter
(the display shows the PARAMETER SCREEN);
key to select the TEMPERATURE IN COOKING CHAMBER parameter
key.
to increase or decrease the humidity/steam value
.
and the actual
.
and the DELTA T
:
;
(from 10% to
key.
and the
:
;
and
.
;