eka EKF 464 TC Original Operating And Instruction Manual page 14

TECNOEKA Srl ___________________________________________________________ operating and instruction manual
The PARAMETER SCREEN reads: "OFF"
use the key
confirmed with the "SELECT"
use the key
with the "SELECT"
When this option is active, at the end of the cooking cycle the display reads: "OVEN IN
MAINTENANCE".
When the cooking cycle is active the display reads: "COOKING IN PROGRESS"
When the cooking cycle is in "PAUSE" the display reads: "BAKING STARTS IN" (count-down)
With "BAKING IN PROGRESS" : the display shows the count-down of the set time in the direction
of the symbol and on the right the total time set of the cooking cycle (of 1 or more STEPS).
Important
The value of the set parameter may be confirmed immediately in the PARAMETER SCREEN
with the "SELECT"
4.3.3.2 TEMPERATURE setting (Parameter screen)
With the "STEP"
1. TEMPERATURE IN COOKING CHAMBER
2. CORE TEMPERATURE
3. DELTA T Value
1. TEMPERATURE IN COOKING CHAMBER
Use the keys and
that confirm the choice with the "SELECT"
With "BAKING IN PROGRESS": the display shows the set temperature in the direction of the
symbol and the actual temperature detected in the cooking chamber in the direction of the
symbol .
2. CORE TEMPERATURE
Use the keys and
that confirm the choice with the
With "BAKING IN PROGRESS": the display shows the set temperature in the direction of the
symbol and the actual temperature detected by the core probe in the direction of the
symbol .
page 14 _____________________________________________________________________________________________
to enable this option (the display then reads "ON") which is
key;
to disable this option (the display reads "OFF" again) which is confirmed
key.
key; otherwise, the value is confirmed automatically after 5".
key the following may be set:
( The core probe is not standard supplied but is an optional accessory)
(
The core probe is not standard supplied but is an optional accessory)
to increase or decrease the temperature (from 30°C to 260°C). After
to increase or decrease the temperature (from 0°C to 100°C). After
"SELECT"
key.
key.