Configuring Encoding Parameters - Honeywell HRGX45 User Manual

60 | HRGX DVR User Manual

Configuring Encoding Parameters

By configuring the encoding parameters you can define the transmission stream type, the
recording resolution, and so on.
To configure encoding parameters for main stream:
1.
2.
3.
www.honeywell.com/security
Go to Menu > Record > Encoding > Record.
Select the camera you want to configure encoding parameters for.
Configure the following encoding parameters for Main Stream(Normal) and Main
Stream(Event):
• Stream Type
• Resolution
• Bitrate Type
• Video Quality
• Frame Rate
• Max. Bitrate Mode
• Max. Bitrate(Kbps)
Set the stream type to Video or Video & Audio.
Set the recording resolution to one of the following settings:
WD1, 4CIF, 2CIF, CIF, or QCIF.
Set the bitrate type to Variable or Constant.
Set the recording video quality. 6 levels configurable.
Set the recording frame rate.
Set the bit rate mode to General or Customize.
Select or customize the maximum bit rate for recording.