Xx-Motor (Hcit Elevator) Error Service Check - Lexmark X734de Service Manual

168.xx—Motor (HCIT elevator) error service check
Step Questions / actions
Is the paper properly loaded in the high-
1
capacity input tray (HCIT)?
1. Turn the printer off.
2
2. Reseat option tray 5.
3. Bring the printer up in Diagnostics Menu
(turn the multifunction printer off, press
and hold 3 and 6, turn the MFP on, and
then release the buttons when the
progress bar displays).
4. Touch PRINT TESTS.
5. Touch HCIT.
6. Touch Single.
Did the page print?
Turn the printer off, and then remove the rear
3
frame cover. See
removal" on page
Check the option cable in connector
JOPT1 (A) on the system board for proper
connection, for cable pinch points, and for any
other damage to the cable or connector
A
Is the cable damaged?
Remove the HCIT right cover. See
4
right cover removal" on page
the cable in the HCIT.
Is the cable damaged?
"Rear frame cover
4-40.
1 JBIN1 1 1 JFUSER1 JHVPS1 1 1 JBLW1 1
1
JSB1 1 JFAN1 JBOR1 JMIRR1 1 JOPP1
1
JCVR1
F5
F6 JT1
JLVPS2
1
JCARTP1 F7
1 J49
JCARTS1
1
JBOOT1 1
JUSB1
1
JDIMM1
F9 J10
JCARTS2
1
JTLBT1 JTLBT1
1
JCARTP2 1 JFMUSB1
1 JTWF1
1
F10
JTDBUG1
1 JDVR1 1
JTPS1
1
JOPT1 J5
JDX1
1 1
1 F13
1 JFDS1
F12
1 JINT1 JINT1 F14
JFDPCK1 JTRAY1 JSEC1
JPH1
1
1 JT12
"HCIT
4-292. Check
Yes
Go to step 2.
Problem resolved.
Replace the option cable.
See
"Option cable
removal" on page 4-135.
Replace the elevator-up
cable. See
7526
No
Fan the media, and then
stack flat in the HCIT
drawer.
Go to step 3.
Go to step 4.
Replace the elevator motor
motor. See
"HCIT elevator
motor with sensor
removal" on page 4-296.
Diagnostic information
2-63
Previous
Next
Go Back