Unwind the camshaft/transport cable and the cartridge 1/fuser cables (H).
9.
Note: Be sure to rewind the camshaft/transport cable around the other cables with about four twists to
keep them from interfering with or being damaged by the motors.
Disconnect the cartridge 2/cartridge 3 motor cable (two connectors) (J), and remove the cable from the
10.
cable clamps (K).
K
Disconnect the motor drive cable connector (L), and remove the cable from the cable clamps (M)
11.
J
H
K
Repair information
7526
Previous
Next
Go Back
4-91