Scanner Mdc Card Removal - Lexmark X734de Service Manual

7526

Scanner MDC card removal

Warning: When replacing any one of the following components:
•
Scanner MDC card
•
System board
Only replace one component at a time. Replace the required component, and perform a POR before
replacing a second component listed above. If this procedure is not followed, the printer will be
rendered inoperable.
Remove the left cover. See
1.
2. Remove the screw (A) that secures the ground cable, and remove the ADF cable (B).
Service Manual
4-286
"Left cover removal" on page 4-23.
Previous
Next
Go Back