Paper pick mechanism assembly removal
See for the part number.
Remove the paper tray.
1.
Remove the waste toner assembly. See
2.
3.
Remove the rear frame cover. See
Disconnect the connector in JFDPCK1 (A) and JTRAY1 (B) on the system board.
4.
Open the latch (C) to remove the toroids from the cables.
5.
Push the cables through the hole in the frame below the two connectors.
6.
"Waste toner assembly
"Rear frame cover removal" on page
removal".
4-40.
Repair information
7526
Previous
Next
Go Back
4-137