7526
Duplex Tests
Quick Test (duplex)
Note: Before you set the duplex top margin, be sure to set the skew and alignment. See
alignment" on page
This test prints a duplex version of the Quick Test that can be used to verify the correct placement of the top
margin on the back side of a duplex page.
You can run one duplexed page (Single), or continue printing duplexed pages (Continuous) until Stop (
pressed. For information about changing the margin, see
The paper you choose to print the page on should be either Letter or A4.
To print the Quick Test (duplex):
Touch DUPLEX TESTS.
1.
1.
Touch Quick Test.
Select Single or Continuous.
2.
•
The single Duplex Quick test cannot be canceled. It stops when a single duplex sheet is printed.
The continuous test continues printing until you press Stop (
•
The printer attempts to print the Quick Test Page from the default paper source.
•
Check the Quick Test Page for the correct offset between the placement of the first scan line on the
•
front and back side of a duplexed sheet.
Service Manual
3-18
4-9.
"Top Margin (duplex)" on page
).
"Printhead
) is
3-20.
Previous
Next
Go Back