7526
Remove the two screws (C), and the ground cables from the screws (D).
8.
Note: Be sure to reconnect the ground cables when you reinstall the card.
Remove the card.
9.
Scanner ICC cable removal
1.
Remove the ADF. See
Turn the ADF over. Be sure to brace the ADF to prevent damage.
2.
Remove the three screws (A) securing the MDC cable cover, and remove the cover.
3.
Disconnect the ICC cable (B) from the scanner ICC card.
4.
Service Manual
4-284
"ADF removal (entire)"
Previous
Next
Go Back