Lexmark X734de Service Manual page 258

7526
201 paper jam
Open the upper front door, and then open the lower front door.
1.
Warning: Potential Damage—To avoid overexposing the photoconductors, do not leave the front doors
open for more than 10 minutes.
Determine where the jam is located, and then remove it:
2.
If paper is visible under the fuser, then grasp it on each side and pull it forward.
•
If paper is not visible:
•
c. Turn the screws on the fuser to the left.
d. Remove the fuser, and then remove the jam.
Replace the fuser, and then turn the screws to the right to fasten it securely.
e.
Close the lower front door, and then close the upper front door.
3.
Touch Continue.
4.
Service Manual
3-62
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
Previous
Next
Go Back