Top access cover assembly removal
See
"Top access cover assembly" on page 7-3
Note: If you are planning on installing the top cover assembly to fix the broken top cover spring mount (A), you
can replace just the springs.
See
"Top access cover springs removal" on page 4-179
entire top cover assembly.
Remove the right cover. See
1.
Remove the rear frame cover. See
2.
Disconnect the operator cable connector at JOPP1 (A) and the USB connector cable in connector
3.
JFMUSB1 (B) on the system board.
Remove the USB cable from the cable restraints (C).
4.
for the part number.
to fasten the springs without having to replace the
"Right cover removal" on page
"Rear frame cover removal" on page
4-41.
4-40.
Repair information
7526
Previous
Next
Go Back
4-43