Driven Pulley/Centrifugal Clutch Assembly - Arctic Cat DVX 250 2007 Service Manual

DRIVEN PULLEY/CENTRIFUGAL
CLUTCH ASSEMBLY
Disassembling
! WARNING
This procedure involves relaxing a compressed
spring assembly. DO NOT attempt disassembling
without the proper tools.
1. Place the driven pulley on a suitable spring com-
pressor; then mark the pulley faces and centrifu-
gal clutch for alignment during assembling.
2. Secure the centrifugal clutch with the spring
compressor; then remove the clutch nut.
3. Release the spring pressure and remove the cen-
trifugal clutch assembly from the driven pulley.
Back
3-30
KM374A
KM373
Back to TOC
4. Remove the spring and spring seat; then remove
the hub collar.
5. Remove four pins and bushings from the fixed
face hub; then remove the movable face.
Back to Section TOC
KM375
KM385
KM384
KM380
Next