Arctic Cat DVX 250 2007 Service Manual page 77

Back
3-48
KM324A
KM347A
Back to TOC
12. Install the coil (see Section 5).
13. Install the carburetor (see Section 4).
14. Install the muffler assembly (see Section 8).
15. Install the gas tank (see Section 4).
16. Install the air filter (see Section 4).
17. Install the fenders and front rack; then install the
side panels (see Section 8).
18. Install the battery; then connect the positive and
negative battery cables.
19. Pour in the recommended amount and grade of
engine coolant, engine oil, and transmission
lubricant.
20. Start the engine and allow it to warm up; then
check all fluid levels and add as required.
Back to Section TOC