Arctic Cat DVX 250 2007 Service Manual page 45

7. Remove the shift shaft; then remove plug,
seal/washer, spring, and shift cam stopper ball.
8. Remove the shift fork guide shaft; then remove
the upper shift fork and shift cam.
9. Remove the lower shift fork.
Back
3-16
KM652A
KM677A
KM619A
KM679A
Back to TOC
10. Remove the countershaft and driveshaft as an
assembly.
11. To disassemble the countershaft, use the follow-
ing procedure.
A. Remove the thrust washer and high gear
clutch dog.
B. Remove the high drive gear circlip and
washer; then remove the high drive gear and
thrust washer.
Back to Section TOC
KM680
KM681
KM684
Next