Arctic Cat DVX 250 2007 Service Manual page 102

6. Remove the brake disc assembly from the axle.
7. Loosen the drive chain (see Section 2); then slip
the chain off the sprocket and remove the axle
assembly from the right side.
8. Remove the cap screw from the rear brake cali-
per holder; then remove the circlip securing the
caliper holder to the axle housing.
Back
KM471
KM472
KM476
Back to TOC
9. Remove the brake caliper holder and aligning
collar. Account for the O-ring.
10. Remove the two cap screws from the rear of the
swing arm assembly; then remove the rear axle
housing from the right side of the swing arm.
11. Remove the circlip securing the driven sprocket
to the axle; then remove the sprocket.
Back to Section TOC
KM481
KM483
6
KM484
Next
6-3