To Start Desktop Easyexpert - Agilent Technologies B1500A Training Manual

To Start Desktop EasyEXPERT

Important:
To set the same configuration as the B1500A,
copy the following file from B1500A to your PC.
The location must be the same.
\Documents and Settings\All Users\Application Data\Agilent Technologies, Inc\EasyEXPERT\UnitConfigB1500A.xml
To open the Start EasyEXPERT window, click Start > Programs > Start EasyEXPERT menu. This
window provides the Option menu used to open the following dialog box.
Gpib Communication:
Select Online if the B1500A, 4155B/C, or 4156B/C is connected to your computer and you want to
control it via GPIB. Or else select Offline.
Database Backup Creation Wizard:
Use this wizard to create the EasyEXPERT database backup (xdb file).
Database Restoration Wizard:
Use this wizard to restore the EasyEXPERT database backup. The wizard can restore the xdb file or
the backup which is a copy of the folder that contains the EasyEXPERT database.
EasyEXPERT Database:
Specify the EasyEXPERT Database path if you want to move the database to the other folder.
To launch Desktop EasyEXPERT, click the Start EasyEXPERT button.
Note: Desktop EasyEXPERT supports most of the EasyEXPERT functions. However, some
functions are not supported on an external computers due to differences in hardware and so on.
Note: For the installation procedure, see the readme file stored in the Desktop EasyEXPERT CD-
ROM.
Note: For the offline mode. To use the same module configuration as the B1500A, copy the
UnitConfigB1500A.xml file to your PC which the Desktop EasyEXPERT runs. The file is stored in
the B1500A hard disk drive. The location is shown in the slide. The file must be copied to the same
location in your PC.
Database Backup Creation Wizard
Database Restoration Wizard
12-22
Module 12
Miscellaneous Operations