To Define Test Contents - Agilent Technologies B1500A Training Manual

To Define Test Contents

5. Click Insert or
desired button
1
3. Specify the line
to insert element
or to be edited
Starting to define the test contents:
1. Highlight the Local Variables Definition line.
2. Define the local variables used in this test contents (test execution flow).
3. Highlight the line that an element has to be inserted.
4. Highlight an element of Program Component, Application Test, Analysis, Classic Test,
Miscellaneous, or My Favorite Setup tab menu.
5. Click the Insert button of the Edit tab menu. The element will be inserted between the highlighted
line and the next line.
6. Define the required setup.
To edit the test contents:
1. Optional. Highlight the Local Variables Definition line.
2. Optional. Define the local variables used in this test contents (test execution flow).
3. Highlight the line to be edited.
4. Highlight an additional element if you need.
5. Click the desired button if you need.
6. Define the required setup if you need.
Repeat this to create the test contents (test execution flow).
4. Select available element
2. Define the local variables used
in this test contents
6. Define the setup required for
the highlighted line (element)
10-11
Module 10
Creating Your Test Definitions