Available Variables; Contents - Agilent Technologies B1500A Training Manual

Available variables

Test Contents
•Local variables
Test Specification
•Device parameters
•Test parameters
Test Output
•Analysis parameters
Do not set the same name
for variables and
parameters. The name
must be unique.
In the test execution flow (program flow), you can use the following variables.
•Variables defined by the Local Variables Definition component
•Device parameters defined in the Test Specification
•Test parameters defined in the Test Specification
•Analysis parameters defined in the Test Output
You may want to read the parameters/variables used in Classic Test setup or Application Test setup
defined in the Test Contents. Then use the External Variables Setup dialog box or built-in functions.
They can connect the test setup internal variables/parameters to the external variables listed above.
For the example variable connections, see "To Use Test Setup Internal Variables" in Module 9.
Note: Application test internal parameter/variable to be connected to an external variable must be the
analysis parameter in its test definition.
Assign to external variables...
You can connect the
variables in test setup with
•Local variables
•Device parameters
•Test parameters
•Analysis parameters
10-13
Module 10
Creating Your Test Definitions