Agilent Technologies B1500A Training Manual page 113

Class Exercise
Flash Memory Endurance Test
1. Recall the Demo-S-NorFlash Endurance test record.
2. Connect the DUT (MOS FET, not flash memory) as
shown in the next page.
3. Specify the module (SMU and PGU) connected to
DUT terminal properly.
4. Perform the test.
To perform this class exercise, you need the following equipment.
16440A Selector with control cable, 2 sets
16445A Selector adapter with control cable, 1 set
B1500A installed with two SPGU modules and four SMU modules
Test fixture
Triaxial cable, 7 ea.
BNC-SMA cable, 3 ea.
Or,
B1500A installed with two SPGU modules, three pairs of HRSMU and ASU, and a SMU module
Test fixture
Triaxial cable, 7 ea.
BNC-SMA cable, 3 ea.
ASU control cable, 3 ea.
13-29
Module 13
SPGU Control and Applications