Agilent Technologies B1500A Training Manual page 94

SPGU Control
SPGU Pulse Setup
SPGU Control
Buttons on
Measurement Setup
screen of a Classic Test
If the SPGU output mode is set to VPULSE, the Pulse/ALWG button opens the SPGU Pulse Setup
window. This window is used to define the voltage pulses applied by the specified SPGU channels.
For the setup parameters, see later page titled Pulse Setup Parameters of Pulse Generator Mode. In
the other classic test, this window is opened by the SPGU Pulse Setup button on the Measurement
Setup screen.
The Pulse Switch button opens the dialog box used to set the pulse switch operation.
The Load Z button opens the dialog box used to set the load impedance of the DUT.
13-10
Module 13
SPGU Control and Applications