What Is Test Definition; Contents - Agilent Technologies B1500A Training Manual

What is Test Definition

Test Specification
•Test name
•Test description
•Variables
•Device parameters
•Test parameters
•Entry fields
Test Contents
Test definition consists of test specification, test contents, and test output setup. The test
specification contains test name, description, device parameters, and test parameters. The parameters
will be the variables used to pass the test conditions to the test execution flow or test setup defined in
the test contents. Especially for the test parameters, you can specify the position of entry field for
each parameter. You can see the entry fields when the main screen displays this application test
setup. The test contents are the core of the test definition. You will define the local variables, test
execution flow, and test setup. You can define the test setup by selecting application tests, classic
tests, or my favorite setup, and entering the test conditions.
The test output setup is optional. If you have the following requirements, declare the analysis
parameters and define the display parameters on the Test Output tab screen.
-To send the test data to the subsequent tests
-To make the program branching depends on the test data
-To display/record the calculation result using the test data
-To display/record the test data of this application test
-To change the multi display mode of this application test
Note: You can use the device parameters, test parameters, and analysis parameters in the test
execution flow (program flow) of the test contents without declaration of local variables.
Note: If the multi display mode is Disabled, the all test result data will be displayed on the singular
Data Display window. If the multi display mode is Enabled, the test result data of the same test setup
name will be displayed on the exclusive Data Display window and the test result data of the different
test setup name will be displayed on the new Data Display window.
Test Output
•Multi display mode
•Variables
•Test result display
•Local variables
•Test execution flow
•Test setup
•Classic test
•Application test
•My Favorite setup
10-3
Creating Your Test Definitions
•Analysis parameters
•X-Y graph
•Data list
•Parameter display
Module 10