Ricoh RN-MF2 Field Service Manual page 191

Error Code
Mail part body acquisition
error (E-mail reception
4xxx26
failed)
Mail delete error (E-mail
4xxx27
reception failed)
Invalid mail header (E-mail
4xxx41
reception failed)
Invalid part header (E-mail
4xxx42
reception failed)
Codec Error (A TIFF file
4xxx43 could not be received
properly.)
TIFF over spec (A TIFF file
4xxx44 could not be received
properly.)
TIFF Form abnormal (A TIFF
4xxx45 file could not be received
properly.)
Memory Overflow (The
4xxx46 machine memory reached
capacity)
Description
There was an error in the received TIFF file
(which resulted from a condition not indicated
by the error codes4xxx43 to 4xxx45). Ask the
sender to check the TIFF file.
Ask the sender to check the e-mail settings.
Ask the sender to check the e-mail settings.
Ask the sender to check the e-mail settings.
The compression method of the received TIFF file
was other than MH/MR/MMR. Ask the sender
to check the TIFF file.
The resolution of the TIFF file was not supported,
or the width of the TIFF file was A3 or B4. Ask
the sender to check the TIFF file.
The format of the TIFF file was other than TIFF-
S/F. Ask the sender to check the TIFF file.
The fax was too large. Ask the sender to resend
the document in parts as several smaller
individual faxes, or send at a lower resolution.
Error Messages
Solution
31