Ricoh RN-MF2 Field Service Manual page 189

Table of Contents

Advertisement

Error Code
xxxx70
xxxx80
xxxx81
xxxx82
xxxx83
xxxx84
Internet Fax Error Code Table
Sending Error
Error Code
Log in error (Connection to
the server failed)
3xxx11
Mail header Edit error (E-
mail transmission failed)
3xxx12
Mail part header Edit error
(E-mail transmission failed)
3xxx13
Mail part body Edit error (E-
mail transmission failed)
3xxx14
Error Type
Comm. Error
4. Phase-E Error
Comm. Error
5. Other general Comm
Error
Description
Error Description
Time Out
modem hang-up
V34 abort received
V34 t1 timeout, control channel error
V34 t1 timeout, primary channel error
data not sent until guard timer expire
Solution
Confirm that the network cable is properly
connected to the machine.
Confirm that the network settings such as IP
address, DNS, and SMTP settings have been
configured properly (make sure that no double-
byte character is used).
Confirm that the network settings such as IP
address, DNS, and SMTP settings have been
configured properly (make sure that no double-
byte character is used).
Confirm that the network settings such as IP
address, DNS, and SMTP settings have been
configured properly (make sure that no double-
byte character is used).
Confirm that the network settings such as IP
address, DNS, and SMTP settings have been
configured properly (make sure that no double-
byte character is used).
Error Messages
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

M119M118

Table of Contents