Ricoh RN-MF2 Field Service Manual page 133

Messages
FW Update Done. *** Please
reboot the Machine.***
Message for Network update
Messages
Connecting...
Net Upload : End of data
Net Upload : FAIL
Can't open ROM file. Please
check ROM file.
Can't open Eng. ROM file.
Please check Eng. ROM file.
New Version: Update FW
Comment
F/W update is completed.
Comment
Connect to MFP.
Update F/W successfully.
(Transmission Time: <30 sec)
Can not open FTP port of MFP
before F/W file is transmitted.
(Transmission will be canceled if
timeout.)
F/W file transmission can not be
completed.
(Transmission will be canceled if
timeout.)
F/W file does not exist.
Engine F/W file does not exist.
AIO FW is transmitting
Firmware Updating
Action
Please reboot the Machine.
Action
Please wait a moment.
Please reboot MFP after panel
shows reboot message.
(1) Check network cable
connection.
(2) Check MFP status if it is
available.
(3) Check MFP and PC IP
address setting.
(4) Check PC firewall setting
about FTP.
(1) Check network cable
connection.
(2) Check MFP status if it is
available.
Check the download file name
in setting.ini. "ImageFile="
Check the download file and
fw update tool is in the same
folder.
Check the download file name
in setting.ini. "EngImageFile="
Check the download file and
fw update tool is in the same
folder.
Not available
131