Ricoh RN-MF2 Field Service Manual page 114

5. System Maintenance Reference
Engine Maintenance
Paper Buckle
Amount
Fusing Unit
Temperature
112
Vert. Tray1 Plain Paper
Vert. Tray1 Thick Paper
Vert. Tray1 Thin Paper
Vert. Bypass Plain Paper
Vert. Bypass Thick Paper
Vert. Bypass Thin Paper
Vert. Tray2 Plain Paper
Vert. Tray2 Thin Paper
Vert. Tray2 Thick Paper
Vert. Dup. Plain Paper
Vert.Dup. Thin Paper
Vert Dup. Thick Paper
Plain Paper
Thick1 Paper
Thick2 Paper
Standby
Low Power
Adjusts the amount of paper buckle at the registration
roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the registration
roller for each tray and paper type.
[-8 to 8 / -2 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the registration
roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the registration
roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the amount of paper buckle at the registration
roller for each tray and paper type.
[-8 to 8 / 0 (Default) / 1 mm/step]
Adjusts the fusing temperature for plain paper.
[150 to 190 / 175 (Default) / 5°C/step]
Adjusts the fusing temperature for thick 1 paper.
[160 to 200 / 185 (Default) / 5°C /step]
Adjusts the fusing temperature for thick 2 paper.
[160 to 200 / 185 (Default) / 5°C/step]
Adjusts the fusing temperature in the standby mode.
[120 to 175 / 155 (Default) / 1°C/step]
Adjusts the fusing temperature in the low power mode.
[80 to 135 / 120 (Default) / 5°C/step]