Ricoh RN-MF2 Field Service Manual page 177

Message
2-sided copy could not be
Available: 2 Sided performed because the tray does
Copy A4/LG/LT not contain the valid size paper,
which are A4, Letter, or Legal.
ID card copy could not be
Available: IDCard
performed because the tray does
Copy A4 or 8 1/2
not contain the valid size paper,
x 11
which are A4 or Letter size.
Fax transmission could not be
Busy completed because the
destination's line was busy.
Combined copying could not be
Cannot Copy This
performed because the tray does
Setting
not contain the valid size paper,
Comb.: 2 on 1 / 4
which are A4, Letter, or Legal
on 1
size.
Combined copying/2-sided
Cannot copy.
copying could not be performed
Set original to
because the originals were not
ADF.
placed in the ARDF or ADF.
Check Paper Size The paper size set for the
document differs from the size of
the paper in the indicated tray.
Causes
• Specify the tray containing the A4,
• Specify A4, Letter, or Legal for the
• Set the machine to print copies using
• Specify the A4 or Letter size paper for
Wait for a while and send the fax again.
Set the machine to print copies using the
A4, Letter, or Legal size paper in the
[Select Paper] setting. See User Guide.
Specify the A4, Letter, or Legal size paper
for the tray selected for printing copies.
See User Guide.
• Use the ARDF or ADF, even when
• If you need to use the exposure glass,
Press [FormFeed] to begin printing, or
press [JobReset] to cancel the job.
Solutions
Letter, or Legal size paper in the
[Select Paper] setting. See User
Guide.
tray selected for printing copies. See
the user's guide.
the A4 or Letter size paper in the
Select Paper] setting. See User
Guide.
the tray selected for printing copies.
See the user's guide.
copying a single sheet.
turn off combined copying/2-sided
copying in [Duplex/Combine] under
copy settings, and then try again. See
the user's guide.
Error Messages
17