Table of Contents
Advertisement
• Setting.ini (Parameter setting)
• xxx.brn (Controller Firmware)
3. Make a folder on a local drive of your computer and save the files there.
4. Connect a computer and the machine through a network or directly by USB.
5. Click the "FWUpdateToolSP.exe" file to execute the updating program.
6. For a USB connection, click "F/W Update (USB)" [A]. For a network connection, enter the
machine's IP address in "Machine IP" [B], and then click "F/W Update (NET)" [C].
7. Check the firmware update tool window for messages and the update's current percentage of
completion.
• Do not turn off the main power from this point until the update procedure is completed.
8. Wait until "FW Update Done.***Please reboot the Machine.***" appears in the firmware
update tool window. Also check that update completion message appears on the machine's
control panel.
9. Turn off the power of the machine, and then turn it back on.
10. Print a configuration or maintenance page to check the machine's firmware version.
Firmware Updating
127
Advertisement
Table of Contents
