Renaming A Program; Moving A Program; Deleting A Program; List Utilities - BIO RAD PTC-200 Operation Manual

Renaming a Program

To rename a program, select Rename from the File Menu, then press «Proceed».
Locate the program to be renamed (see "Locating a Stored Program," p. 8-2), then
press «Proceed». A naming screen will be displayed:
Name the new program (see "Naming the Program," chapter 6), then press «Proceed».
The program will be renamed and stored, and the Main Menu will be displayed.

Moving a Program

To move a program, select Move from the Files Menu, then press «Proceed». Locate
the program to be moved (see "Locating a Stored Program," p. 8-2), then press
«Proceed». A screen listing all folders will be displayed. Select the folder the program
should be moved to, then press «Proceed». The program will be moved to the new
folder, and the Main Menu will be displayed.

Deleting a Program

To delete a program, select Delete from the Files Menu, then press «Proceed».
Locate the program to be deleted (see "Locating a Stored Program," p. 8-2), then
press «Proceed». A confirmation screen will be displayed:
Select Yes, then press «Proceed». The program will be deleted, and the Main Menu
will be displayed.
To cancel the deletion, press «Cancel», or select No and press «Proceed».

List Utilities

Use these utilities, available under List, to accomplish the following task:
• View and print program steps
Rename:
New name: A
Delete: CUSTO M 3
Delete program?
_YES
Tech Support: 1-800-4BIORAD • 1-800-424-6723 • www.bio-rad.com
CUSTO M 1
No
Using the Utilities
8-5