Setting A Model - JRC JLN-205MK2 Quick Reference

4.2.4 Setting a model

The model is set.
When the model is set, the setting contents are initialized.
Procedure
1.
Refer to "4.2.3 Changing to a maintenance mode" to display the maintenance menu.
2.
Select "DISPLAY TYPE" by using
3.
Select "MID" or "LOG" by using
4.
When the following popup menu is displayed, press "YES".
When "NO" is selected, the model setting is cancelled.
Caution
・When "LOG" is selected wrong, the following messages appears.
After the messages appears, press
message is canceled.
Then, select "MID" again in the previous procedure.
・Don't turn off the power supply until the "INITIALIZING" disappears.
and press
and press
and
Please turn on
the power again.
.
.
for 8 seconds. The
4-13